VESTEROL® Contact 10D
- Bonding bridge for mineral plasters on smooth, dense substrates
- to consolidate sandy and dusty surfaces
- to improve the adhesion of problematic substrates for subsequent plasters based on gypsum, lime and cement
- for outdoor and indoor areas
- bond-active
- surface hardening
Pictograms
APPLICATION LOCATION:
outside, wall
inside, wall
PROCESSING TEMPERATURE
(air, surroundings, product)
min. 5°C to max. 35°C
PERSONAL PROTECTIVE EQUIPMENT:
Safety goggles und
gloves
TOOLS / ACCESSORIES:
Brush
CLEANING THE TOOLS
Water
STORAGE
Duration: 12 months
Conditions: frost-free
DISPOSEL COMPANY
Interseroh Transportverpackung
20447
Features
Properties
VESTEROL® Kontakt 10D is a saponification-resistant plastic dispersion with granular fillers and adhesion-promoting additives. The dried film is characterized by good adhesion even on very dense and smooth mineral substrates and a non-slip surface and provides particularly good anchoring for subsequent layers of plaster thanks to the cubic grain shape of the aggregates used. It reduces and evens out the absorbency of the substrate and prevents plaster coatings from burning and cracking. Prevents harmful ettringite formation of gypsum plaster on fresh concrete substrates and covers minor release agent residues.- bond-active
- surface hardening
- saponification resistant
- rough plaster
Applications
- fresh concrete surfaces
- very dense and smooth precast concrete elements
- highly absorbent substrates, building materials (aerated concrete)
- impregnated and painted surfaces
Composition
- Synthetic resin dispersion
- Fillers
- Granulate
- Pigments
Processing
Processing
Processing
- Dilute the product with up to 20 % water depending on the absorbency of the substrate.
- Apply with a roller or surface brush.
Cleaning the tools
- Clean tools immediately after use with water.
Notes
- Maintain a processing temperature of +5 °C to +35 °C.
- The plaster is applied after VESTEROL® Kontakt 10D has dried completely.
- Carry out a preliminary test with low-binder plasters.
- Not suitable for permanently wet areas.
Technical data
| Colour | red |
| pH value | ca. 9 |
| Processing temperature | +5°C up to +35°C |
| Drying time | approx. 3 hours |
Article
| Article No. | Article Abbreviation | GTIN/EAN 4004637 | Package size |
|---|---|---|---|
| 40136 | Kontakt 10D red | - 40136 6 | 20 kg/PE bucket |