VE Reinforcement insert 89V
- Reinforcing insert for reinforcing coatings, alkali-resistant
- for the reinforcement of crack-bridging coating compounds
- for layer thickness control
- to increase mechanical load capacities
- alkali resistant
- Mesh size: approx. 5 × 6 mm
Features
Applications
- Plastic-modified bitumen thick coatings
- Reinforcement of coatings
Composition
- Glass fabric
- Acrylate
Processing
Substrate
Pretreatment
- The substrate preparations must be carried out in accordance with the specifications of the respective waterproofing system
Processing
Processing
- Cut the fabric to the required length.
- Apply the first layer of coating compound.
- The fabric is embedded fresh in fresh in the first waterproofing layer. The fabric must not be pressed through onto the substrate.
- The fabric is then covered with the second waterproofing layer. IMBERAL VE 89V must be completely covered with the coating and must not protrude from the waterproofing at any point.
Notes
- Embed IMBERAL VE 89V in the center of the waterproofing layers.
- Install sheets with an overlap of approx. 5 cm.
- Observe the processing instructions of the respective waterproofing product used.
Article
| Article No. | Article Abbreviation | Role width | GTIN/EAN 4004637 | Package size |
|---|---|---|---|---|
| 40145 | VE 89V Roll 1.0 m × 50 m | 100 cm | - 40145 8 | 50 m²/roll |