INTRASIT® SE-SB 10D
- Mould-Ex – spore binder with 3-phase active system
- component of the Mold-Ex remediation system for binding mold spores to the substrate
- when removing the contaminated plaster or masonry, the release of spores into the room air is significantly reduced
- primer on newly created plaster surfaces, acts against new infestation by mold
- in the Mold-Ex remediation system, followed by the color design with INTRASIT SE-SF 70A
- horizontal and vertical surfaces
- binds mold spores and existing dust (abrasion, cement and quartz dust) to the mineral building material surface
- strengthens building material surfaces through silicate bonds
- reduces the penetration of moisture
Pictograms
APPLICATION LOCATION
outside: floor, wall
inside: Floor, wall
PROCESSING TEMPERATURE
(air, surroundings, product)
min. 5°C to max. 35°C
PERSONAL PROTECTIVE EQUIPMENT:
Safety goggles und
gloves
TOOLS / ACCESSORIES:
Brush
CLEANING THE TOOLS
Water
STORAGE
Duration: 12 months
Conditions: frost-free
DISPOSEL COMPANY
Interseroh Transportverpackung
20447
Features
Properties
INTRASIT® SE-SB 10D is a solvent-free, multi-stage primer. By using a particularly fine-particle, special binder combination, spores are securely bonded to the substrate. At the same time, a silicate binder strengthens the surface of the building material and increases its alkalinity. The hydrophobing agent contained in the product reduces the penetration of moisture into the substrate.The spread of mould growth caused by flying spores, particularly during renovation work, is significantly reduced.- binds mold spores and existing dust (abrasion, cement and quartz dust) to the mineral building material surface
- strengthens building material surfaces through silicate bonds
- reduces the penetration of moisture
- high penetration capacity due to special nanoscale combination of active ingredients
- ready-to-use
- chlorine-free
- acid-free
Applications
- dry and slightly damp, absorbent, mineral substrates
Composition
- Organic and inorganic binders
- Hydrophobic agents
- wetting agent
Processing
Processing
Processing
- INTRASIT SE-SB 10D is ready to use and is applied undiluted to the substrate by brushing, rolling or spraying. Protect adjacent building components.
- Demolition work can begin after a drying time of approx. 30 minutes.
- If INTRASIT SE-SB 10D is used as a primer, INTRASIT SE-SF 70A can be applied directly after drying to a matt finish.
Cleaning the tools
- Clean tools immediately after use with water.
Notes
- Protect adjacent components from splashes and spray mist.
- Do not apply to substrates saturated with water.
Technical data
| Colour | white, transparent drying |
| pH value | approx. 11.5 |
| Processing temperature | +5°C up to +35°C |
Article
| Article No. | Article Abbreviation | GTIN/EAN 4004637 | Package size |
|---|---|---|---|
| 40314 | SE-SB 10D colourless | - 40314 8 | 5 kg/canister |