INTRASIT® BLS 54TR
- Drill hole suspension for the shrinkage-free filling of cavities
- for filling cavities and boreholes for subsequent internal basement waterproofing using chemical horizontal barriers
- for outdoor and indoor areas
- free-flowing
- shrinkage-free
- sulphate-resistant
- grain: 0 – 0,5 mm
Pictograms
APPLICATION LOCATION:
outside, wall
inside, wall
PROCESSING TEMPERATURE
(air, surroundings, product)
min. 5°C to max. 35°C
PERSONAL PROTECTIVE EQUIPMENT:
Safety goggles und
gloves
MIXING:
Water addition: 5,5 liter
MIXING:
Water addition: 8,5 liter
APPROACH:
Spiral stirrer
600 revolutions / minute, 2 minutes
PROCESSING TIME:
45 minutes
TOOLS / ACCESSORIES:
Storrage container
CLEANING THE TOOLS
Water
STORAGE
Duration: 12 months
Conditions: dry
DISPOSEL COMPANY
Interseroh Transportverpackung
20447
Features
Properties
INTRASIT® BLS 54TR is a mineral-based, non-shrinking grouting mortar with good flow properties and high permeability for subsequently injected fluids. It is resistant to water-soluble sulfates commonly found in masonry. Due to its fine grain size, it can be pumped using appropriate machinery.- free-flowing
- shrinkage-free
- sulphate-resistant
- easy to re-drill
- diffusible
Applications
- Masonry
Composition
- Standard cements
- Mineral aggregates
- Swelling agent
- Plastic dispersible polymer powder
Processing
Processing
Processing
- Slowly sprinkle INTRASIT BLS 54TR into clear water in a clean mixing vessel while stirring vigorously until a homogeneous, lump-free and free-flowing mass is formed. Recommended mixing ratio: 25 kg INTRASIT BLS 54TR : 8.5 l water
- Pour into the existing drill holes using a funnel within 45 minutes.
- Alternatively, INTRASIT BLS 54TR can be injected using suitable machine technology. Pay attention to the maximum grain size (maximum 0.5 mm).
- Re-drill after 2 days at the earliest.
- Inject with INTRASIT VK 10A, INTRASIT MEK 18OS or INTRASIT BLK 18OS.
- After the injection liquids have completely seeped away, mix INTRASIT BLS 54TR with water to form a paste-like mass. Recommended mixing ratio: 25 kg –BLS 54TR : 7.5 l water.
- Then fill the drill holes with the mixed compound and fill flush with the wall.
Cleaning the tools
- Clean tools immediately after use with water.
Notes
- Not suitable for crack grouting.
Technical data
| Compressive strength | approx. 3.6 N/mm² |
| Flexural strength | approx. 1.2 N/mm² |
| Processing temperature | +5°C up to +35°C |
| workable time | approx. 45 minutes |
Article
| Article No. | Article Abbreviation | GTIN/EAN 4004637 | Package size |
|---|---|---|---|
| 40123 | BLS 54TR grey | - 40123 6 | 25 kg/sack |