INTRASIT® Aquarol 10A

Properties

• binds adhering dust (abrasion, cement and quartz dust) to the mineral building material surface
• strengthens building material surfaces through silicate bonds and forms a stable base for subsequent coatings
• reduces the absorbency of the substrate by hydrophobizing the surface zone
• high penetration capacity due to special nanoscale combination of active ingredients
• reduces salt transport in the near-surface zone
• sulphate-resistant

Applications

• dry and slightly damp, absorbent, mineral substrates

Composition

• Organic and inorganic binders
• Hydrophobic agents
• wetting agent

Substrate

Suitable substrates

• Dry and slightly damp, absorbent, mineral substrates.

Properties/tests

• The substrate must be absorbent, firm, load-bearing and free of loose particles.
• The substrate may be slightly damp.

Pretreatment

• Remove impurities.

Processing

Processing

• The product is ready to use and is applied undiluted to the substrate by brushing, rolling or spraying. On very dusty surfaces, application with a brush or broom is recommended in order to achieve good incorporation of the dust.
• When used in a instant renovation system, the rest of the system can be applied after a waiting time of approx. 10 minutes. The coating with flexible sealing slurries can be applied directly after the primer has dried to a matt finish.
• Longer waiting times have no influence on the adhesion properties of the subsequent coating. However, the substrate must be kept dust-free until recoating.

Cleaning the tools

• Clean tools immediately after use with water.

Notes

• Protect adjacent components from splashes and spray mist.
• Do not apply to surfaces saturated with water.