HADALAN® Topcoat-Flex
- Polyurethane sealant, flexible
- as an adhesive layer, e.g. for HADALAN ColourChips 89V, as wear protection or for matting the wear layer
- Sealing on synthetic resin coatings or mineral, absorbent substrates used in the HADALAN Velo balcony system.
- for interior and exterior use
- in floor areas
ready-to-use
- light-fast
Pictograms
APPLICATION LOCATION:
outside, floor
inside, floor
PROCESSING TEMPERATURE
(air, surroundings, product)
min. + 8°C to max. + 30°C
PERSONAL PROTECTIVE EQUIPMENT:
Safety goggles und
gloves
APPROACH:
Vane stirrer
400 revolutions / minute, 2 minutes
TOOLS / ACCESSORIES:
Roll
TOOL CLEANING:
Solvent
STORAGE:
Duration: 6 month
DISPOSEL COMPANY
Interseroh Transportverpackung
20447
Features
Properties
HADALAN® Topcoat-Flex is a 1-component lightfast polyurethane resin. Once fully cured, the result is a transparent, flexible protective coating with good abrasion resistance.ready-to-use
- light-fast
- transparent
- flexible at low temperatures
Applications
- Balconies, terraces, arcades
- mineral substrates
Composition
- Polyurethane resin
- Leveling agent
- Additives
Processing
Substrate
Properties/tests
- The substrate must be sound, dry and free from dirt, dust, cleaning agent residues or other separating substances. xx
- There is a risk of condensation forming on the substrate surface in the event of significant temperature changes in conjunction with increased humidity. The substrate must be completely dry before starting the coating work. Otherwise, coating damp surfaces may result in peeling or irritation of the material surface.
Processing
Mixing / Preparation / Processing
- The product is ready to use and only needs to be stirred briefly before use.
Processing
- HADALAN Topcoat-Flex is applied to the substrate in a thin layer using a short pile roller. The specified consumption quantities must be observed. Excessive application quantities can lead to irritation or cracking of the material. Accordingly, care must be taken to ensure that material does not accumulate in depressions and hollows on uneven substrates.
Drying / Hardening
- The surfaces can be carefully walked on the next day. Fully loadable after approx. 5 days.
Cleaning the tools
- Clean tools immediately after use with HADALAN EPV 38L.
- Hardened material can only be removed mechanically.
Notes
- Maintain a processing temperature of +8 °C to +30 °C.
Technical data
| Colour | transparent, silky matt |
| Density | 1,10 g/cm³ |
| Processing temperature | +8°C to +30°C |
| workable time | ca. 6 Stunden |
| Can be walked on after | after approx. 6 hours |
| Load-bearing capacity | fully cured after approx. 24 hours, fully loadable after 5 days |
Article
| Article No. | Article Abbreviation | GTIN/EAN 4004637 | Package size |
|---|---|---|---|
| 41157 | Topcoat-Flex transparent silk-matt | - 41157 0 | 2.5 kg/sheet bucket |
Downloads
| Technical data sheet HADALAN Topcoat Flex | download | |
| Safety data sheet HADALAN Topcoat-Flex | download | |
| Environmental Product Declaration (EPD) for Polyurethane resin products | download | |
| Test certificate 11443 slip resistance R10 – HADALAN Topcoat-Flex / ColourChips | download | |
| Test certificate 11444 slip resistance R11 – HADALAN Topcoat-Flex / DQ0308 | download |