
HADALAN® LF51 12E
- Epoxy dispersion rolled coating, osmosis-resistant, vapour diffusion permeable
- for coating mineral substrates, floors and wall surfaces
- Floor and wall areas
- solvent-free
- diluted with water
- dispersion-bound
Features
Properties
HADALAN® LF51 12E is a two-component, dispersion-bound epoxy resin coating with good chemical resistance and an abrasion-resistant surface.- solvent-free
- diluted with water
- dispersion-bound
- wear-resistant
- good chemical resistance
- vapour-permeable
Applications
- Coatings for warehouse floors, garage floors, basement floors, workshops, and pergolas
- Concrete, screed, cement plaster, masonry, fiber cement
Composition
- Epoxy resin dispersion
- functional fillers
- Pigments
Processing
Substrate
Properties/tests
- The substrate must be clean, sound and stable.
- Temporarily slightly damp substrates do not impair adhesion.
- The adhesive tensile strength of the substrate must be at least 1.5 N/mm².
Pretreatment
- Substrates whose surfaces have been treated with smoothing agents (e.g., wax) must be pretreated accordingly (milling, sandblasting). A wetting test using water provides initial guidance.
- Prime highly absorbent and sanding substrates with HADALAN EBG 13E before coating.
- Coating with HADALAN LF51 12E can be applied approximately 2 hours after applying the primer.
Processing
Processing
- Thoroughly mix Component A and Component B in a suitable container using a low-speed drill with a mixing paddle.
- To achieve the desired spreadable consistency, water may be added up to a maximum of 10%.
- The mixture must be decanted into a suitable, clean container and stirred again briefly before use.
- Apply with a roller or brush. To achieve uniform surfaces, apply with a suitable short pile roller for epoxy resins. Waiting times during application can lead to build-up.
- To achieve uniform color rendering, 2 coats are generally required.
Cleaning the tools
- Clean all tools and equipment with water immediately after use.
Notes
- Maintain an application temperature between +8 °C and +35 °C.
- When used outdoors, the paint is likely to lose its gloss.
- Processing beyond the pot life leads to poor results in terms of film strength and visual impression.
- Surfaces and substrates that are heavily greasy, or where rising or lateral moisture penetration is likely, are unsuitable for coating.
- Ensure adequate ventilation while the product is drying. The product contains water, which must evaporate from the coating film.
- Optically related areas must be prepared with material from the same production batch to prevent colour differences.
- The substrate temperature must be at least 3 °C above the dew point temperature during application and curing.
- Make sure to apply an even amount of product; uneven application can result in variations in gloss.
- To maintain the surface quality of the coating, the use of care products and regular cleaning of the floors is recommended (see HADALAN epoxy resin flooring care instructions).
Technical data
| Processing temperature | +8°C to +35°C |
| Workable time | approx. 60-80 minutes |
| Can be walked on after | light loads can be applied after 24 hours |
| Load-bearing capacity | final strength after approx. 5 days |
Article
| Article No. | Article Abbreviation | Color tone | GTIN/EAN 4004637 | Package size |
|---|---|---|---|---|
| 40282 | LF51 12E stone grey approx. RAL 7030 | stone gray approx. RAL 7030 | - 40282 0 | 6 kg/combination container |
Downloads
| Technical data sheet HADALAN LF51 12E | download | |
| Safety data sheet HADALAN LF51 12E | download | |
| Overview of chemical resistance HADALAN LF51 12E | download | |
| Care instructions for HADALAN epoxy resin flooring | download | |
| Test certificate 12141 slip resistance R12 – HADALAN LF51 / Quartz0105 | download | |
| Test certificate 12142 slip resistance R11 – HADALAN LF51 / 3% KG | download | |
| Test certificate 12143 slip resistance R9 – HADALAN ColourChips Teilabchipsung / Topcoat M | download | |
| Test certificate 12144 slip resistanceg R11 – HADALAN LF51 / 5% KG | download | |
| Test certificate 12145 slip resistance R9 – HADALAN LF51 | download | |
| Test certificate 12146 slip resistance R12 – HADALAN LF51 / DQ0308 | download | |
| Test certificate 12147 slip resistance R11 – HADALAN ColourChips Vollabchipsung / Topcoat M | download |