HADALAN® HE 10D
- Enhancement for bonding bridges, concrete, mortar and screed
- as an additive to improve adhesion and flexural strength when producing bonding bridges, wear-resistant and crack-free cement screeds, plaster and repair mortar
- for touch-ups and repairs to concrete, plaster, screed and stone
- to improve oil resistance
- resistant to saponification
- highly concentrated
- increases flexural tensile strength
Pictograms
APPLICATION LOCATION
outside: floor, wall
inside: Floor, wall
PROCESSING TEMPERATURE
(air, surroundings, product)
min. + 5°C to max. + 30°C
PERSONAL PROTECTIVE EQUIPMENT:
Safety goggles und
gloves
TOOLS / ACCESSORIES:
Additional system products required
CLEANING THE TOOLS
Water
STORAGE
Duration: 12 months
Conditions: frost-free
DISPOSEL COMPANY
Interseroh Transportverpackung
20447
Features
Properties
HADALAN® HE 10D is a saponification-resistant, highly concentrated plastic dispersion with plasticizing additives. Increases adhesion to mineral substrates.- resistant to saponification
- highly concentrated
- increases flexural tensile strength
- improves adhesion
- increases oil resistance
Applications
- Concrete, screed, plaster, mortar
Composition
- Synthetic resin dispersion
Processing
Substrate
Pretreatment
- Remove loose particles, dust and adhesion-depleting contaminants.
- Pre-wet substrate until matt damp.
Processing
Mixing / Preparation / Processing
- Repair mortar/screed:
Recommended mixing ratio up to 10 mm application thickness:
Powder component: 1 RT cement : 2 RT sand 0/3 mm
Mixing liquid: 1 RT HADALAN® HE 10D : 3 RT water - Repair mortar/screed:
Recommended mixing ratio above 10 mm application thickness:
Powder component: 1 RT cement : 3 RT sand 0/5 mm
Mixing liquid: 1 RT HADALAN® HE 10D : 4 RT water - Bonding bridge:
Recommended mixing ratio:
Cement/sand mixture 0/1, 1 : 2 parts by weight
Mixing liquid mixed from adhesive emulsion/water 1 : 2
Mix the powder component with the mixing liquid to form a slurry and brush vigorously into the substrate.
Cleaning the tools
- Clean all tools and equipment with water immediately after use.
Notes
- Maintain a processing temperature of +5 °C to +30 °C.
Technical data
| Processing temperature | +5°C to +30°C |
| Drying time | approx. 2 hours |
Article
| Article No. | Article Abbreviation | GTIN/EAN 4004637 | Package size |
|---|---|---|---|
| 40139 | HE 10D | - 40139 7 | 5 kg/PE bucket |